Search for: All records

Abstract Although metal-polymer heterogeneous structures possess exceptional mechanical, thermal, and electrical properties, their fabrication remains challenging due to the reactive nature of the materials and the risk of property alteration during manufacturing. This study investigates the printing quality of metal-polymer structures fabricated using electrically assisted heterogeneous material printing (EF-HMP), focusing on the relationship between the polymer and metal layers and their electrical properties. The developed printing solution enables the transport of metal ions for metal printing onto a polymer matrix under a controlled electrical field. The study emphasizes the critical role of polymer microstructures in influencing metal electrodeposition, including printing time and morphology. Three microstructure geometries—rectangular, trapezoidal, and semicircular—were designed based on manufacturability and surface-area-to-volume ratio and evaluated for their impact on metal-polymer fabrication via EF-HMP process. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and electrical conductivity tests revealed that the semicircular microstructure provided the best printing performance, forming a robust metal structure in a short time and achieving the lowest resistance of 12 kΩ. This research highlights the potential of EF-HMP for metal-polymer fabrication, offering new insights into the influence of interfacial polymer microstructures on metal printing at room temperature. These findings pave the way for optimizing the design and functionality of metal-polymer components in metamaterials, thermal management, and flexible electronics applications. 

Collecting fog water is crucial for dry areas since natural moisture and fog are significant sources of freshwater. Sustainable and energy-efficient water collection systems can take a page out of the cactus’s playbook by mimicking its native fog gathering process. Inspired by the unique geometric structure of the cactus spine, we fabricated a bioinspired artificial fog collector consisting of cactus spines featuring barbs of different sizes and angles on the surfaces for water collection and a series of microcavities within microchannels inspired by Nepenthes Alata on the bottom to facilitate water flowing to the reservoir. However, replicating the actual shape of the cactus spine using conventional manufacturing techniques is challenging, and research in this area has faced a limitation in enhancing water-collecting efficiency. Here, we turned to 3D printing technology (vat photopolymerization) to create bio-mimetic fog collectors with a variety of geometric shapes that would allow for the most effective conveyance and gathering of water. Various barb sizes, angles between each barb in a single array, spine and barb arrangements, and quantity of barbs were tested experimentally and numeric analysis was carried out to measure the volume of water collected and optimize the mass rate. The result shows that optimal fog collection is with a mass flow rate of 0.7433 g/min, with Li = 900 μm, θ = 45°, ϕ = 90°, Nb = 2, and Ns = 5. This study presents a sustainable and ecologically sound method for efficiently collecting humid air, which is expected to be advantageous for the advancement of future-oriented fog-collection, water-transportation, and separation technologies.